Proceedings - 2018 NETL CO2 CAPTURE TECHNOLOGY PROJECT REVIEW MEETING

2018 NETL CO₂ CAPTURE TECHNOLOGY PROJECT REVIEW MEETING

August 13-17, 2018

Previous Proceedings

• 2017 NETL CO₂ Capture Technology Project Review Meeting

Proceedings of the 2018 NETL CO₂ Capture Technology Project Review Meeting

Table of Contents

Presentations

• Monday, August 13, 2018
  • Opening Session
  • Systems Studies And Modeling
  • Carbon Capture Simulation for Industry Impact (CCSI²)
  • DOCCSS with CCSI² Support
• Tuesday, August 14, 2018
  • Carbon Capture Simulation for Industry Impact (CCSI²)
  • Capture – Lab/Bench-Scale Research with CCSI² Support
  • Capture – Lab/Bench-Scale Research
  • Oxy-Combustion
  • Oxy-Combustion and Novel Concepts
• Wednesday, August 15, 2018
  • Capture – Lab/Bench-Scale Research
  • Capture – Pilot-Scale Research
  • Chemical Looping
• Thursday, August 16, 2018
  • CO₂ Compression
  • Large-Scale Pilot Testing
  • Design and Testing of Advanced Carbon Capture Technologies
  • Novel and Enabling Transformational Technologies
  • CO₂ Utilization
• Friday, August 17, 2018
  • CO₂ Utilization

Poster Presentations

 

---

Presentations

Monday, August 13, 2018
OPENING SESSION

• Welcoming Remarks
  Sean Plasynski, Director (Acting), U.S. Department of Energy, National Energy Technology Laboratory
• U.S. DOE Office of Fossil Energy’s Research and Development Programs
  Steven E. Winberg, Assistant Secretary, Office of Fossil Energy, U.S. Department of Energy
• Global Update on CCUS and Higher Capture Rates
  Tim Dixon, IEA Greenhouse Gas
• U.S. and Norway Joint Success in Advancing CO₂ Capture Technologies
  Bjørn-Erik Haugan and Jørild Svalestuen, Gassnova SF
• CO₂ Capture R&D at EPRI
  Abhoyjit Bhown, Electric Power Research Institute
• The Wyoming Integrated Test Center: A Venue for up to 20 MWe Scale-up of Developing CO₂ Capture Technologies
  Will Morris, Efficient Fuel Additives
• Overcoming Barriers to Advance Fossil Energy Technologies
  Shannon Angielski, Carbon Utilization Research Council
• Mission Innovation Activities Carbon Capture Workshop and Final Report
  Jordan Kislear, U.S. Department of Energy, Office of Fossil Energy

SYSTEMS STUDIES AND MODELING

• SEA Post-Combustion Analysis Update
  Timothy Fout, U.S. Department of Energy, National Energy Technology Laboratory
• Performance and Cost Sensitivities for Post-Combustion Membrane Systems
  Alexander Zoelle, Leidos
• Modeling the Impacts of 45Q
  Christopher J. Nichols, U.S. Department of Energy, National Energy Technology Laboratory

CARBON CAPTURE SIMULATION FOR INDUSTRY IMPACT (CCSI²)

• Carbon Capture Simulation for Industry Impact (CCSI²) Overview
  Michael Matuszewski and John Shinn, CCSI²
• Open Source Toolset Community Support
  Keith Beattie, Lawrence Berkeley National Laboratory
• Development and Application of Advanced Process Control for UKy CO₂ Capture Pilot Plant
  Priyadarshi Mahapatra, AECOM/WVURC

DOCCSS WITH CCSI² SUPPORT

• Amine-Appended Metal-Organic Frameworks as Switch-Like Adsorbents for Energy Efficient Carbon Capture (FWP-00006194)
  Jeffrey Long, Lawrence Berkeley National Laboratory
• DOCCSS Support for LBNL MOF Sorbents, MECS Device Scale Modeling
  Debangsu Bhattacharyya, West Virginia University
• Low-Viscosity, Water-Lean CO₂ Binding Organic Liquids (CO₂BOL) with Polarity-Swing Assisted Regeneration (PSAR) (FWP-70924)
  David Heldebrant, Pacific Northwest National Laboratory
• DOCCSS Support for PNNL CO₂BOLs Solvents
  Zhijie (Jay) Xu, Pacific Northwest National Laboratory
  Charles Freeman, Pacific Northwest National Laboratory
• High-Efficiency, Integrated Reactors for Sorbents, Solvents, and Membranes Using Additive Manufacturing (FWP-FEW0225)
  Joshuah Stolaroff, Lawrence Livermore National Laboratory
• DOCCSS Support for LLNL Advanced Reactor Manufacturing
  Zhijie (Jay) Xu, Pacific Northwest National Laboratory

Tuesday, August 14, 2018
CARBON CAPTURE SIMULATION FOR INDUSTRY IMPACT (CCSI²)

• Sequential Design of Experiments
  Christine Anderson-Cook, Los Alamos National Laboratory

CAPTURE – LAB/BENCH-SCALE RESEARCH WITH CCSI² SUPPORT

• Evaluation of Piperazine with Advanced Flash Regeneration for CO₂ Capture from Coal-Fired Flue Gas(FE0005654)
  Gary Rochelle, University of Texas at Austin
• Modeling the Advanced Flash Stripper
  Gary Rochelle, University of Texas at Austin
  Ben Omell, U.S. Department of Energy, National Energy Technology Laboratory
• Hybrid Encapsulated Ionic Liquids for Post-Combustion Carbon Dioxide Capture (FE0026465)
  Mark McCready, University of Notre Dame
• MECS Device-Scale Modeling
  Debangsu Bhattacharyya, West Virginia University

CAPTURE – LAB/BENCH-SCALE RESEARCH

• A Combined Computational and Experimental Method for Mixed Matrix Membranes for Post-Combustion CO₂ Capture
  David Hopkinson, U.S. Department of Energy, National Energy Technology Laboratory
• A High Performance Physical Solvent for Pre-Combustion CO₂ Capture
  Nicholas Siefert, U.S. Department of Energy, National Energy Technology Laboratory
• A Data Mining Method for the Identification of New Physical Solvents
  Wei Shi, U.S. Department of Energy, National Energy Technology Laboratory-AECOM
• Additively Manufactured Intensified Device for Enhanced Carbon Capture (FWP-FEAA130)
  Xin Sun, Oak Ridge National Laboratory
• Cryogenic Carbon Capture Development (FE0028697)
  Larry Baxter, Sustainable Energy Solutions/Brigham Young University
• Enabling 10 MOL/KG Swing Capacity in Post-Combustion CO₂ Capture Processes (FE0026433)
  Krista S. Walton, Georgia Institute of Technology
• Rapid Design and Testing of Novel Gas-Liquid Contacting Devices for Post-Combustion CO₂ Capture via 3D Printing: Modular Adaptive Packing (FE0031530)
  Erik Meuleman, ION Engineering
• Evaluation of Amine-Incorporated Porous Polymer Networks (APPNs) as Sorbents for Post-Combustion CO₂ Capture (FE0026472)
  Hong Cai "Joe" Zhou, Texas A&M University
• Combined Sorbent/WGS-Based CO₂ Capture Process with Integrated Heat Management for IGCC Systems (FE0026388)
  Santosh Gangwal, Southern Research Institute
• Sorption Enhanced Mixed Matrix Membranes for Hydrogen Purification and Carbon Dioxide Capture (FE0026463)
  Haiqing Lin, State University of New York (SUNY) - Buffalo
• Zeolite Membrane Reactor for Pre-Combustion Carbon Dioxide Capture (FE0026435)
  Lie Meng, Arizona State University
• A High Efficiency, Ultra-Compact Process for Pre-Combustion CO₂ Capture (FE0026423)
  Theodore Tsotsis, University of Southern California

OXY-COMBUSTION

• Pre-Project Planning for a Flameless Pressurized Oxy-Combustion Pilot Plant (FE0027771)
  Joshua Schmitt, Southwest Research Institute
• Particle Separator for Improved Flameless Pressurized Oxy-Combustion (FE0031549)
  Joshua Schmitt, Southwest Research Institute
• Integrated Flue Gas Purification and Latent Heat Recovery for Pressurized Oxy-Combustion (FE0025193)
  Richard Axelbaum, Washington University in St. Louis
• Enabling Staged Pressurized Oxy-Combustion: Improving Flexibility and Performance at Reduced Cost (FE0029087)
  Scott Hume, Electric Power Research Institute
• Technology Demonstration of a High-Pressure Swirl Oxy-Coal Combustor (FE0029113)
  Jad Aboud, University of Texas at El Paso
• Oxy-Combustion System Process Optimization (FE0029090)
  Gokhan Alptekin, TDA Research Inc.
• Development of Enabling Technologies for a Pressurized Dry Feed Oxy-Coal Reactor (FE0029157)
  Bradley Adams, Brigham Young University
• Characterizing Impacts of Dry Coal Feeding in High Pressure Oxy-Coal Combustion Systems (FE0029162)
  Kevin Davis, Reaction Engineering International

OXY-COMBUSTION AND NOVEL CONCEPTS

• Characterizing Impacts of High Temperatures and Pressures in Oxy-Coal Combustion Systems (FE0025168)
  Kevin Davis, Reaction Engineering International
• Catalytic Removal of Oxygen and Pollutants in Exhaust Gases from Pressurized Oxy-Combustors (FE0029161)
  Hafiz Salih and Yongqi Lu, Illinois State Geological Survey, University of Illinois at Urbana-Champaign
• Flue Gas Water Vapor Latent Heat Recovery for Pressurized Oxy-Combustion (FE0025350)
  Dexin Wang, Gas Technology Institute
• Advanced Cost-Effective Coal-Fired Rotating Detonation Combustor for High Efficiency Power Generation (FE0031545)
  Kareem Ahmed, University of Central Florida-Center for Advanced Turbomachinery & Energy

Wednesday, August 15, 2018
CAPTURE – LAB/BENCH-SCALE RESEARCH

• Development of a Novel Biphasic CO₂ Absorption Process with Multiple Stages of Liquid-Liquid Phase Separation for Post-Combustion Carbon Capture (FE0026434)
  Yongqi Lu, Illinois State Geological Survey, University of Illinois at Urbana-Champaign
• Bench-Scale Development of a Hybrid Membrane-Absorption CO₂ Capture Process (FE0013118)
  Brice Freeman, Membrane Technology and Research Inc.
• Large Bench Scale Development of Non-Aqueous Solvent Carbon Dioxide Capture Process for Coal Fired Power Plants Utilizing Real Coal Derived Flue Gas (FE0026466)
  Jak Tanthana, RTI International
• Energy Efficient GO-PEEK Hybrid Membrane Process for Post-Combustion Carbon Dioxide Capture (FE0026383)
  Shiguang Li, Gas Technology Institute
• Bench Scale Testing of Next Generation Hollow Fiber Membrane Modules (FE0026422)
  Alex Augustine, American Air Liquide Inc.
• Novel CO₂-Selective Membranes for CO₂ Capture < 1% CO₂ Sources (FE0026919)
  Yang Han and Winston Ho, The Ohio State University
• Lab-Scale Development of a Hybrid Capture System with Advanced Membrane, Solvent System, and Process Integration (FE0026464)
  Hunaid Nulwala and David Luebke, Liquid Ion Solutions LLC.
  Scott Chen, Carbon Capture Scientific
• Lab-Scale Development of a Solid Sorbent for CO₂ Capture Process for Coal-Fired Power Plants (FE0026432)
  Mustapha Soukri, RTI International
• Development of a Precombustion Carbon Dioxide Capture Process Using High Temperature Polybenzimidazole Hollow-Fiber Membrane (FE0012965)
  Indira Jayaweera, SRI International

CAPTURE – PILOT-SCALE RESEARCH

• National Carbon Capture Center (FE0022596)
  Tony Wu, Southern Company
• Advanced Solvent Testing and Evaluation at TCM (FWP-70814)
  Charles Freeman, Pacific Northwest National Laboratory
  Satish Reddy, Fluor
• Pilot Unit Sorbent-Based CO₂ Capture (FE0012870)
  Jeannine Elliott, TDA Research, Inc.
• Application of a Heat Integrated Post-Combustion Carbon Dioxide Capture System with Hitachi Advanced Solvent into Existing Coal-Fired Power Plant (FE0007395)
  Jesse Thompson, University of Kentucky Center for Applied Energy Research
• Pilot Test of a Nanoporous, Super-Hydrophobic Membrane Contactor Process for Post-Combustion Carbon Dioxide Capture (FE0012829)
  Shiguang Li, Gas Technology Institute
• Pilot Test of Novel Electrochemical Membrane System for Carbon Dioxide Capture and Power Generation (FE0026580)
  Hossein Ghezel-Ayagh, FuelCell Energy Inc.
• Pilot Testing of a Highly Effective Pre-Combustion Sorbent-Based Carbon Capture System (FE0013105)
  Gokhan Alptekin, TDA Research, Inc.
• Dilute Source Carbon Dioxide Capture: Management of Atmospheric Coal-Produced Legacy Emissions (FE0026861)
  Ricky Souza, Carbon Engineering

CHEMICAL LOOPING

• 10 Megawatts Electric Coal Direct Chemical Looping Large Pilot Plant - Pre-Front End Engineering and Design Study (FE0027654)
  Luis Velazquez-Vargas, The Babcock & Wilcox Company
• Heat Integration Optimization and Dynamic Modeling Investigation for Advancing the Coal Direct Chemical Looping Process (FE0029093)
  Andrew Tong, The Ohio State University
• Coal-Fueled Pressurized Chemical Looping Combustion with a Spouting Fluidized Bed  (FE0025098)
  Kunlei Liu, University of Kentucky
• Integrated Oxygen Production and CO₂ Separation Through Chemical Looping Combustion with Oxygen Uncoupling (FE0025076)
  Kevin Whitty, University of Utah
• Development of Enabling Technologies for Chemical Looping Combustion and Chemical Looping with Oxygen Uncoupling (FE0029160)
  Kevin Whitty, University of Utah
• Chemical Looping with Oxygen Uncoupling Systems Studies
  Bob Stevens, U.S. Department of Energy, National Energy Technology Laboratory
• Overview of CLC Research at NETL
  Doug Straub, U.S. Department of Energy, National Energy Technology Laboratory
• Methodology for Attrition Evaluation of Oxygen Carriers in Chemical Looping Systems (SC011984)
  Srivats Srinivasachar, Envergex LLC.
• Method for Separation of Coal Conversion Products from Sorbents/Oxygen Carriers (SC0013832)
  Srivats Srinivasachar, Envergex LLC.
• Low-Cost and Recyclable Oxygen Carrier and Novel Process for CLC (FE0031534)
  Junior Nasah, University of North Dakota, Institute for Energy Studies

Thursday, August 16, 2018
CO₂ COMPRESSION

• Advanced Carbon Dioxide Compression with Supersonic Technology (FE0026727)
  Ravi Srinivasan, Dresser-Rand, A Siemens Business

LARGE-SCALE PILOT TESTING

• Large Pilot Testing of Linde/BASF Advanced Post-Combustion CO₂ Capture Technology at a Coal-Fired Power Plant (FE0031581)
  Kevin O’Brien, Illinois Sustainable Technology Center
• UKy-CAER Heat Integrated Transformative CO₂ Capture Process in Pulverized Coal Power Plants (FE0031583)
  Heather Nikolic, University of Kentucky-CAER
• Large Pilot Testing of the MTR Membrane Post-Combustion CO₂ Capture Process (FE0031587)
  Richard Baker, Membrane Technology and Research Inc.

DESIGN AND TESTING OF ADVANCED CARBON CAPTURE TECHNOLOGIES

• Engineering Scale Testing of Transformational Non-Aqueous Solvent-Based CO₂ Capture Process at Technology Centre Mongstad (FE0031590)
  Shaojun James Zhou, Research Triangle Institute
• Scale-Up and Testing of Advanced Polaris Membrane CO₂ Capture Technology (FE0031591)
  Tim Merkel, Membrane Technology and Research Inc.
• Membrane-Sorbent Hybrid System for Post-Combustion CO₂ Capture (FE0031603)
  Gokhan Alptekin, TDA Research, Inc.
• Engineering Scale Demonstration of Mixed-Salt Process for CO₂ Capture (FE0031588)
  Indira Jayaweera, SRI International
• ION Engineering Commercial Carbon Capture Design & Costing (FE0031595)
  Erik Meuleman, ION Engineering
• Initial Engineering Design of a Post-Combustion CO₂ Capture System for Duke Energy’s East Bend Station Using Membrane-Based Technology (FE0031589)
  Abhoyjit Bhown, Electric Power Research Institute
• Initial Engineering, Testing, and Design of a Commercial-Scale, Post-Combustion CO₂ Capture System on an Existing Coal-Fired Generating Unit (FE0031602)
  Jason Laumb, Energy and Environmental Research Center

NOVEL AND ENABLING TRANSFORMATIONAL TECHNOLOGIES

• Development and Bench-Scale Testing of a Novel Biphasic Solvent-Enabled Absorption Process for Post-Combustion Carbon Capture (FE0031600)
  Paul Nielsen, Illinois State Geological Survey, University of Illinois at Urbana-Champaign
• Development of Self-Assembly Isoporous Supports Enabling Transformational Membrane Performance for Cost Effective Carbon Capture (FE0031596)
  Hans Wijmans, Membrane Technology and Research, Inc.
• A Process with Decoupling Absorber Kinetics and Solvent Regeneration through Membrane Dewatering and In-Column Heat Transfer (FE0031604)
  James Landon, University of Kentucky
• Mixed-Salt Based Transformational Solvent Technology for CO₂ Capture (FE0031597)
  Palitha Jayaweera, SRI International
• Bench-Scale Development of a Transformational Graphene Oxide-Based Membrane Process for Post-Combustion CO₂ Capture (FE0031598)
  Shiguang Li, Gas Technology Institute
• Flue Gas Aerosol Pre-Treatment Technologies to Minimize PCC Solvent Losses (FE0031592)
  Devin Bostick, Linde LLC

CO₂ UTILIZATION

• Storing CO₂ in Built Infrastructure: CO₂ Carbonation of Precast Concrete Products (FE0030684)
  Brian R. Ellis, University of Michigan
• Nano Engineered Catalyst Supported on Ceramic Hollow Fibers for the Utilization of CO₂ in Dry Reforming to Produce Syngas (FE0029760)
  Shiguang Li, Gas Technology Institute
• High Energy Systems for Transforming CO₂ To Valuable Products (FE0029787)
  Osman Akpolat, Gas Technology Institute
• Advanced Manufactured Carbonate Materials for Algal Biomass Production: Joint LLNL-SNL Program (FWP-16-019510)
  Jennifer Knipe, Lawrence Livermore National Laboratory
• Upcycled CO₂-Negative Concrete for Construction Functions (FE0029825)
  Erika Callagon La Plante, University of California Los Angeles
• Microalgae Commodities from Coal-Fired Power Plant Flue Gas CO₂ (FE0026490)
  John Benemann, MicroBio Engineering, Inc.

Friday, August 17, 2018
CO₂ UTILIZATION

• Environmental Life Cycle Analysis Guidance for Carbon Utilization Projects
  Timothy Skone, U.S. Department of Energy, National Energy Technology Laboratory
• Catalytic Conversion of CO₂ into Value Added Products
  Douglas Kauffman, U.S. Department of Energy, National Energy Technology Laboratory
• CO₂ Mineralization Using Porous Carbon and Industrial Wastes to Make Multifunctional Concrete (FE0030716)
  Rouzbeh Shahsavari, C-Crete Technologies, LLC
• A New Process for CO₂ Conversion to Fuel (FE0029866)
  Gokhan Alptekin, TDA Research Inc.
• Improving the Economic Viability of Biological Utilization of Coal Power Plant CO₂ by Improved Algae Productivity and Integration with Wastewater (FE0030822)
  Lance Schideman, Sustainable Technology Center, University of Illinois at Urbana-Champaign
• Novel Catalysts Process Technology for Utilization of CO₂ for Ethylene Oxide and Propylene Oxide (FE0030678)
  Marty Lail, Research Triangle Institute
• A Combined Biological and Chemical Flue Gas Utilization System Towards Carbon Dioxide Capture from Coal-Fired Power Plants (FE0030977)
  Wei Liao, Michigan State University
• Low Temperature Process Utilizing Nano-Engineered Catalyst for Olefin Production from Coal Derived Flue Gas (FE0029570)
  Jadid E. Samad, Southern Research
• Maximizing Current Density for Electrochemical Conversion of Flue Gas Carbon Dioxide to Ethanol (FWP-FEAA132)
  Adam Rondinone, Oak Ridge National Laboratory
• Electrochemical CO₂ Conversion to Alcohols (FE0029868)
  Feng Jiao, University of Delaware
• CO₂ to Bioplastics: Beneficial Re-Use of Carbon Emissions from Coal-Fired Power Plants using Microalgae (FE0029623)
  Michael Hayes Wilson, University of Kentucky Center for Applied Energy Research

 

POSTER PRESENTATIONS

POSTER PRESENTATIONS - CARBON CAPTURE

• Membrane-Integrated Sorbent Adsorption Process (SC0011885)
  Gokhan Alptekin, TDA Research Inc.
• Process Intensification for Carbon Capture (SC0013823)
  Kenneth Lux, Altex Technologies Corporation
• Process for CO₂ Capture from Low Concentration Sources (SC0015114)
  Ravi Jain, InnoSepra LLC
• Passive CO₂ Separation Membranes for Hot Flue Gases (SC0017124)
  Matthew Merrill, Luna Innovations, Inc.
• Cross-Linked Ionic Liquid/Polyether Gels for CO₂ Separation Membranes
  Samir Budhathoki, AECOM, National Energy Technology Laboratory
• Amine-Containing Facilitated Transport Membranes for Post-Combustion CO₂ Capture
  James Baker, U.S. Department of Energy, National Energy Technology Laboratory
• An Integrated Approach of Database. Machine Learning in Molecular Simulation to Screen Physical Solvents for Gas Separation
  Wei Shi, AECOM/National Energy Technology Laboratory
• Microporous Polymer Design and Preparation for CO₂ Capture and Separation from Flue Gas
  Jim Hoffman, U.S. Department of Energy, National Energy Technology Laboratory
• Computational Designing and Screening Solid Materials for CO₂ Capture
  Yuhua Duan, U.S. Department of Energy, National Energy Technology Laboratory
• Computational Modelling of Bulk and Surface Properties of ZIF-8 for Carbon Capture Applications
  Hari Paudel, U.S. Department of Energy, National Energy Technology Laboratory
• Microporous Polymer Based Blend Membranes with Advanced Gas Separation Performance
  Ali Sekizkardes, AECOM/National Energy Technology Laboratory
• Sequential Design of Experiments in FOQUS to Maximize Learning from Experiments
  Towfiq Ahmed and Christine Anderson-Cook, Los Alamos National Laboratory
• High Temperature Ceramic-Carbonate Dual-Phase Membrane Reactor for Pre-combustion Carbon Dioxide Capture (FE0031634)
  Lie Meng, Arizona State University
• Transformational Membranes for Pre-combustion Carbon Capture (FE0031635)
  Yang Han, The Ohio State University
• Open Sourced Toolset Community Support
  Keith Beattie, CCSI/Lawrence Berkeley National Laboratory
• Development of Carbon Molecular Sieves Hollow Fiber Membranes Based on Polybenzimidazole Doped with Polyprotic Acids with Superior H₂/CO₂ Separation Properties (FE0031636)
  Haiqing Lin, State University of New York (SUNY) - Buffalo
• Bench-Scale Development of a Transformative Membrane Process for Pre-Combustion CO₂ Capture (FE0031632)
  Jay Kniep, Membrane Technology and Research, Inc.
• Development of a Pre-Combustion CO₂ Capture Process using High-Temperature PBI Hollow-Fiber Membranes (FE0031633)
  Indira Jayaweera, SRI International
• Emissions Mitigation Technology for Advanced Water-Lean Solvent–Based CO₂ Capture Processes
  Jak Tanthana, RTI International
• Advancing Post-Combustion CO₂ Capture through Increased Mass Transfer and Lower Degradation
  Jesse Thompson, University of Kentucky Research Foundation
• Universal Solvent Viscosity Reduction via Hydrogen Bonding Disruptors
  Hanaid Nulwala, Liquid Ion Solutions, LLC.
• Inexpensive and Sustainable Anti-Corrosion Coating for Power Generation Applications
  John Watkins, Lumishield Technologies, Inc.
• ROTA-CAP: An Intensified Carbon Capture System Using Rotating Packed Beds
  Osman Akpolat, Gas Technology Institute
• CFD Modeling for Mass Transfer in Packed Column
  Zhijie Xu, Pacific Northwest National Laboratory
• Discrete Particle Modeling of Carbon Capture using Semipermeable Elastic Microcapsules
  Justin Finn, National Energy Technology Laboratory-AECOM
  Janine Carney, U.S. Department of Energy, National Energy Technology Laboratory
• Improving Full-Scale Models of New Carbon Capture Technologies with Uncertainty Quantification
  K. Sham Bhat, Los Alamos National Laboratory
  Christopher S. Russell, Los Alamos National Laboratory, Brigham Young University
  Joshua C. Morgan, U.S. Department of Energy, National Energy Technology Laboratory

POSTER PRESENTATIONS - CO₂ Utilization

• Solar Energy Powered Material-Based Conversion of CO₂ to Fuels (SC0015855)
  Jeffrey Weissman, Precision Combustion, Inc.
• Conversion of CO₂ to Alkyl Carbonates Using Ethylene Oxide as Feedstock (SC0013233)
  Chandrakant B. Panchal, E3TEC Service, LLC
• Electrochemical Reduction of Carbon Dioxide to Useful Chemical Intermediates (SC0017105)
  Philip Cox, Mainstream Engineering Corporation