Back to Top
Skip to main content
NETL Logo

2022 Carbon Management Project Review Meeting - Point Source Carbon Capture - Proceedings

  • Monday, August 15, 2022

Capture From Industrial Sources

Cryogenic Carbon Capture from Cement Production (FE0032148)
Christopher Hoeger, Sustainable Energy Solutions, LLC

Industrial Carbon Capture from a Cement Facility Using the Cryocap FG Process (FE0032136)
Hafiz Salih, University of Illinois at Urbana, Champaign

Engineering Design of a Polaris Membrane CO2 Capture System at a Cement Plant (FE0031949)
Tim Merkel, Membrane Technology and Research, Inc.

Carbon Capture & Hydrogen Production from a Blast Furnace Using a Novel Reforming Scheme (FE0031937)
Atanu Mukherjee, Dastur International, Inc.

Societal Considerations and Impacts
Holly Buck, Office of Fossil Energy and Carbon Management, Division of Strategic Engagement, U.S. DOE

Application of Transformational University of Kentucky 3 Tonne Per Day Carbon Dioxide Capture System at a Steel Process Plant (FE0032133)
Kunlei Liu, University of Kentucky

Engineering Design of a Linde-BASF Advanced Amine Technology for CO2 Capture from H2 Plant Flue Gas (FE0031943)
Minish M. Shah, Linde, Inc.

Engineering Study of Svante's Solid Sorbent Post-Combustion CO2 Capture Technology at a Linde Steam Methane Reforming H2 Plant (FE0032113)
Nicki Stuckert, Linde, Inc.

Initial Engineering and Design for CO2 Capture from Ethanol Facilities (FE0031938)
Jason Laumb, University of North Dakota Energy and Environmental Research Center

Front End Engineering Design for Carbon Capture from Shell's Deer Park Chemical Complex (FE0032142)
Brenda Clark and Rebecca Jones, Wood Environment & Infrastructure Solutions, Inc.

Initial Engineering Design Study for Advanced CO2 Capture from Hydrogen Production Unit at Phillips 66 Rodeo Refinery (FE0032109)
Jeff Drese, Phillips 66 Company

Blue Bison ATR Advanced CCUS System (FE0032114)
Jeff Schaefer, Tallgrass MLP Operations, LLC

The 8RH2 Process for Producing Clean Hydrogen with Autothermal Reforming and Carbon Capture (FE0032127)
Adam Goff, 8 Rivers Capital, LLC

 

  • Tuesday, August 16, 2022

Capture From Power Generation/Pilot-Scale Research

A High Efficiency, Modular Pre-Combustion Capture System for 21st Century Power Plant Poly-Generation Process (FE0031926)
Gokhan Alptekin, TDA Research, Inc.

Critical Component/Technology Gap in 21st Century Power Plant Gasification Based Poly-Generation: Advanced Ceramic Membranes/Modules for Ultra Efficient H2 Production/CO2 Capture for Coal-Based Polygeneration Plants (FE0031930)
Richard Ciora, Media and Process Technology, Inc.

Pilot Testing of a Highly Effective Pre-Combustion SorbentBased Carbon Capture System (FE0013105)
Gokhan Alptekin, TDA Research, Inc.

Large Pilot Testing of Linde-BASF Advanced Post-Combustion Carbon Dioxide Capture Technology at a Coal-Fired Power Plant (FE0031581)
Stephanie Brownstein, University of Illinois

Large Pilot Testing of the MTR Membrane Post-Combustion CO2 Capture Process (FE0031587)
Brice Freeman, Membrane Technology and Research, Inc.

National Carbon Capture Center (FE0022596)
Tony Wu, Southern Company

Engineering-Scale Demonstration of the Mixed-Salt Process for CO2 Capture (FE0031588)
Indira Jayaweera, SRI International

Testing and Evaluation of Transformational Non-Aqueous Solvent (NAS)-Based CO2 Capture Technology at Engineering Scale at TCM (FE0031590)
Marty Lail, RTI International

Membrane-Sorbent Hybrid System for Post-Combustion Carbon Capture (FE0031603)
Gokhan Alptekin, TDA Research, Inc.

Scale Up and Testing of Polaris Capture Management at TCM (FE0031591)
Tim Merkel, Membrane Technology and Research, Inc.

ROTA-CAP: An Intensified Carbon Capture System Using Rotating Packed Beds (FE0031630)
Osman Akpolat, Gas Technology Institute

Safeguarding Amines from Oxidation by Enabling Technologies (FE0031861)
Fred Closman, University of Texas at Austin

Chevron Natural Gas Carbon Capture Technology Testing Project
Scott McLemore, Chevron U.S.A., Inc

 

  • Wednesday, August 17, 2022

Capture From Power Generation/Pilot-Scale Research

Engineering-Scale Test of a Water-Lean Solvent for Post-Combustion Capture (FE0031945)
Abhoujit Bhown, Electric Power Research Institute

Engineering Scale Design and Testing of Transformational Membrane Technology for CO2 Capture (FE0031946)
Shiguang Li, GTI Energy
Yang Han, The Ohio State University

Engineering-Scale Demonstration of Transformational Solvent on NGCC Flue Gas (FE0031950)
Andrew Awtry, ION Clean Energy, Inc.

Capture From Power Generation/Engineering Design/FEED Studies

Large-Scale Commercial Carbon Capture Retrofit of the San Juan Generating Station (FE0031843)
Cindy Crane, Enchant Energy, LLC

Retrofittable Advanced Combined Cycle Integration for Flexible Decarbonized Generation (FE0032131)
John Sholes, General Electric Company

Deer Park Energy Center Natural Gas Combined Cycle Carbon Capture System Front-End Engineering Design Study (FE0032137)
Carl Herman, Calpine Texas CCUS Holdings, LLC

Front-End Engineering and Design for a CO2 Capture System at Calpine's Delta Energy Center (FE0032149)
Andrew Awtry, ION Clean Energy, Inc.

Piperazine Advanced Stripper Front End Engineering Design (FE0031844)
Gary Rochelle, University of Texas at Austin

A Comparison of FEED Results from Mustang Station and Panda Power
Jorge L. Martorell, University of Texas at Austin

Systems Analysis

Recent Point Source Capture Techno-economic Analysis
Sally Homsy, National Energy Technology Laboratory

Overview of NETL Tools Available for Performing LCA
Derrick Carlson, KeyLogic, Inc.

Development of a Tool to Calculate the System Cost of Replacement Energy
Amanda Harker Steele, National Energy Technology Laboratory

Carbon Capture Simulation for Industry Impact (CCSI2)

CCSI2 Process Modeling and Optimization Highlights
Joshua Morgan, National Energy Technology Laboratory

SDoE Capabilities, Progress, and Applications
Abigail Nachtsheim, Los Alamos National Laboratory

ML Based CFD Model Reduction for Rapid Computational Screening
Phan Nguyen and Brian Bartoldson, Lawrence Livermore National Laboratory

Computational Design and Process Intensification of CO2 Absorbers
Charles Finney, Oak Ridge National Laboratory

Solvent Model Validation for Advanced Solvent and Contactor Design
Zhijie Xu, Pacific Northwest National Laboratory

CCSI2 FOQUS/Toolset Capabilities
Anuja Deshpande, National Energy Technology Laboratory

 

  • Thursday, August 18, 2022

Capture From Power Generation/Lab/Bench-Scale Research

Development of Transformational Membranes (FE0031596)
Hans Wijmans, Membrane Technology and Research, Inc.

Bench-Scale Development of a Transformational Graphene Oxide-Based Membrane Process for Post-Combustion CO2 Capture (FE0031598)
Shiquang Li, GTI Energy

Highly Permeable Thin Film Composite Membranes of Rubbery Polymer Blends for CO2 Capture
Lingxiang Zhu, National Energy Technology Laboratory

Novel Transformational Membranes and Process for CO2 Capture from Flue Gas (FE0031731)
Yang Han and Winston Ho, The Ohio State University

Rational Development of Novel Metal-Organic PolyhedraBased Membranes for CO2 Capture (FE0031736)
Haiqing Lin, University at Buffalo, SUNY

Mixed-Salt-Based Transformational Solvent Technology for CO2 Capture (FE0031597)
Palitha Jayaweera, SRI International

Development and Bench-Scale Testing of a Novel Biphasic Solvent-Enabled Absorption Process for Post-Combustion Carbon Capture (FE0031600)
Yongqi Lu, University of Illinois

Fog and Froth-Based Post Combustion CO2 Capture in Fossil Fuel Power Plants (FE0031733)
Heather Nikolic, University of Kentucky

Highly Efficient Regeneration Module for Carbon Capture Systems in Natural Gas Combined Cycle (NGCC) Applications (FE0032135)
Indira Jayaweera, SRI International

Dual-Loop Solution-Based Carbon Capture System for Net Negative Carbon Dioxide Emissions with Lower Costs (FE0032134)
Heather Nikolic, University of Kentucky

Parametric Testing of CO2-Binding Organic Liquids (CO2BOLs) (FWP-76270)
David Heldebrant, Pacific Northwest National Laboratory

Reducing the Degradation of Carbon Capture Solvents (FWP-77217)
Philip Koech, Pacific Northwest National Laboratory

Transformational Sorbent-Based Process for a Substantial Reduction in the Cost of CO2 Capture (FE0031722)
Ravi Jain, InnoSepra, LLC

Transformational Molecular Layer Deposition Tailor-Made Size-Sieving Sorbents for PostCombustion CO2 Capture (FE0031730)
Maio Yu, University of Buffalo 

Advanced Structured Adsorbent Architectures for Transformative Carbon Dioxide Capture Performance (FE0031732)
Pierre Hovington, Electricore, Inc.

Transformational Sorbent System for Post-Combustion Carbon Capture (FE0031734)
Gokhan Alptekin, TDA Research, Inc.

Plastic Additive, Sorbent-Coated, Thermally Integrated Contactor for CO2 Capture (PLASTIC4CO2) (FE0032132)
Albert Stella, GE Global Research

Bench Scale Test of a Polyethyleneimine Monolith Carbon Capture Process for Natural Gas Combined Cycle Point Sources (FE0032138)
Christopher Bertole, Cormetech, Inc.

 

  • Friday, August 19, 2022

Capture From Power Generation/Lab/Bench-Scale Research

A New Thermal Swing Adsorption Process for Post-Combustion Carbon Capture from Natural Gas Plants (FE0032151)
Gokhan Alptekin, TDA Research, Inc.

Advancing Post Combustion CO2 Capture through Increased Mass Transfer and Lower Degradation (FE0031661)
Jesse Thompson, University of Kentucky

Validation of Transformational CO2 Capture Solvent Technology with Revolutionary Stability (FE0031727)
Erik Meuleman, ION Clean Energy

Intensified, Flexible, and Modular Carbon Capture Demonstration with Additively Manufactured Multi-Functional Device (FWP-FEAA384)
Costas Tsouris, Oak Ridge National Laboratory

Membrane and Solvent Development for Pre-Combustion Carbon Capture
Nicholas Siefert, National Energy Technology Laboratory

Bench Scale Testing of a High Efficiency, Ultra-Compact Process for Pre-Combustion CO2 Capture (FE0031737)
Vasilios Manousiouthakis, University of California - Los Angeles

High-Temperature Ceramic-Carbonate Dual-Phase Membrane Reactor for Pre-Combustion Carbon Dioxide Capture (FE0031634)
Jerry Lin, Arizona State University

Development and Testing of a High Temperature PBI Hollow-Fiber Membrane Technology for Pre-Combustion CO2 Capture (FE0031633)
Elisabeth Perea, SRI International