Lab/Bench Scale Research
MIL-101 (CR)-Amine Sorbents Evaluation Under Realistic Direct Air Capture Conditions (FE0031952)
Christopher Jones, Georgia Institute of Technology
Transformational Sorbent Materials for a Substantial Reduction in the Energy Requirement for Direct Air Capture of CO2 (FE0031953)
Ravi Jain, InnoSepra, LLC
Development Of Advanced Solid Sorbents For Direct Air Capture (FE0031954)
Mustapha Soukri, RTI International
Low Regeneration Temperature Sorbents for Direct Air Capture of CO2 (FE0031965)
James Zhou, Susteon, Inc.
Societal Considerations and Impacts
Holly Buck, Office of Fossil Energy and Carbon Management, Division of Strategic Engagement, U.S. DOE
High Capacity Polymer Aerogel Sorbents for Direct Air Capture (FE0031951)
Mahati Chintapalli, PARC
Gradient Amine Sorbents for Low Vacuum Swing Carbon Dioxide Capture at Ambient Temperature (FE0031958)
Steven Chuang, University of Akron
Next Generation Fiber-Encapsulated Nanoscale Hybrid Materials for Direct Air Capture with Selective Water Rejection (FE0031963)
Ah-Hyung Park, Columbia University
Direct Air Capture using Trapped Small Amines in Hierarchical Nanoporous Capsules on Porous Electrospun Fibers (FE0031969)
Miao Yu, University at Buffalo, SUNY
Membrane Adsorbents Comprising Self-Assembled Inorganic Nanocages (SINCs) for Super-Fast Direct Air Capture Enabled by Passive Cooling (FE0031960)
Haiqing Lin, University at Buffalo, SUNY
Doping and Redoping Effects on Hybrid Polymer Membranes for Direct Air Capture of CO2 (FE0031968)
Maksudaul Alam, Innosense, LLC
Electrochemically-Driven Carbon Dioxide Separation (FE0031955)
Brian Setzler, University of Delaware
Alkalinity Concentration Swing for Direct Air Capture of Carbon Dioxide (FE0031964)
Toly Rinberg, Harvard University
Demonstration of DAC with Building Air Handling Equipment (FWP-FEAA156)
Kashif Nawaz, Oak Ridge National Laboratory
Lab/Bench-Scale Research
DAC Test Center Overview
Ronald Breault, National Energy Technology Laboratory
Processible Porous Polymeric Fiber Adsorbents for LowConcentrated Carbon Dioxide Capture
Ali Sekizkardes, National Energy Technology Laboratory
Computational Screening of MOFs for Carbon Capture
Samir Budhathoki, National Energy Technology Laboratory (LRST)
Demonstration of a Continuous-Motion Direct Air Capture (DAC) System (FE0031957)
Miles Sakwa-Novak, Glogbal Thermostat
A Combined Water and CO2 Direct Air Capture System (FE0031970)
Will Kain, IWVC, LLC
Direct Air Capture Using Novel Structured Adsorbents (FE0031959)
Adelaide Calbry-Muzyka, Climeworks
Direct Air Capture of Energy for Carbon Capture, Utilization, and Storage (CCUS) Partnership (DAC RECO2UP) (FE0031961)
Matthew Atwood, AirCapture
Bench-Scale Testing of Monolithic Poly Propyleneimine Structured Contactors for Direct Air Capture of Carbon Dioxide (FE0032094)
Christopher Bertole, Cormetech, Inc.
Accelerated Life Cycle Testing of Advanced Structured Material Systems for Direct Air Capture (FE0032099)
Mustapha Soukri, RTI International
Carbon Dioxide Removal Innovation Panel
Shashank Samala, Heirloom Carbon Technologies
Andrew Chang, Activate
Raghubir Gupta, Sustaera Inc.
Marcius Extavour, XPRIZE Foundation
Greg Cooney, Office of Carbon Management
-
Wednesday, August 17, 2022
Lab/Bench-Scale Research
Bench Scale Development of a Novel Direct Air Capture Technology using High Capacity Structured Sorbents (FE0032118)
Cory Sanderson, Susteon, Inc.
Advanced Integrated Reticular Sorbent-Coated System to Capture Carbon Dioxide (CO2) Using an AdditivelyManufactured Contactor (AIR2CO2 Contactor) (FE0032126)
David Moore, GE Research
Hybridizing Heat-Integrated 3D Printed Modules with Mass Manufacturable, Low Pressure Drop Fiber Sorbents (FE0032129)
Ryan Lively, Georgia Institute of Technology
King City Asbestos Corporation (KCAC) Mine Carbon Mineralization Field Test (FWP-FEW0278)
Briana Mordick Schmidt, Lawrence Livermore National Laboratory
Energy-Efficient Direct Air Capture System for High Purity CO2 Separation
Joo-Youp Lee, University of Cincinnat
Electrochemically Regenerated Solvent for Direct Air Capture with Cogeneration of Hydrogen at Bench-Scale (FE0032125)
Kunlei Liu, University of Kentucky
Engineering Design/FEED Studies
Spatiotemporal Adaptive Passive Direct Air Capture (FE0032097)
Mike Austell, Carbon Collect, Inc.
Direct Air Capture-Based Carbon Dioxide Removal with United States Low-Carbon Energy and Sinks (FE0032100)
Jason Dietsch, University of Illinois
Scaleup and Site-Specific Engineering Design for Global Thermostat Direct Air Capture Technology (FE0032101)
Mark Steutermann, Black and Veatch Corporation
Justin Federici, ExxonMobil
Eric Ping and Miles Sakwa-Novak, Global Thermostat
Nuclear Powered DAC project in Illinois (FE0032156)
Sean Tanton, Constellation
Low Carbon Intensity Formic Acid Chemical Synthesis from Direct Air Captured CO2 Utilizing Chemical Plant Waste Heat (ChemFADAC) (FE0032157)
Matthew Atwood, AirCapture
FEED Study for Climeworks Direct Air Capture at a California Geothermal Facility with Long-Term Storage (FE0032159)
Kevin O'Brien, Illinois Sustainable Technology Center/University of Illinois
NuDACCS (Nuclear-powered Direct Air Carbon Capture Storage) (FE0032160)
Brandon Webster, Battelle Memorial Institute
FEED Study of Carbon Capture Inc DAC and CarbonCure Utilization Technologies Using United States Steel’s Gary Works Plant Waste Heat (FE0032154)
Kevin O'Brien, Illinois Sustainable Technology Center/University of Illinois
Bioenergy With Carbon Capture and Storage (BECCS)
Net Carbon Negative Capture Technology Evaluation of the Impact of Coal and Biomass Blends on Pre – and Post Combustion Carbon Capture Solvents
Joshua Stanislowski, University of North Dakota Energy and Environmental Research Center
Carbon Dioxide Removal Industry Engagement Panel
Noah Deich, Office of Fossil Energy and Carbon Management, U.S. DOE
Robert Zeller, Oxy Low Carbon Ventures LLC
Sarah Fitzgerald, Wyoming State Government
Frank Morton, National Carbon Capture Center
-
Thursday, August 18, 2022
Direct Air Capture
Benjamin Omell, Process Systems Engineering
David Luebke, Deputy Executive Director of the NETL DAC Test Center
David Huckaby, CFD for Direct Air Capture
Tim Fout, Energy Process Analysis Team Strategic Systems Analysis & Engineering Directorate
Ron Breault, Thermal Science Team Supervisor
Alfred Unione, Research Support Services Senior Management Team