14th Annual SECA Workshop
14th Annual SECA Workshop
July 23, 2013
Table of Contents
PRESENTATIONS
Tuesday, July 23, 2013
Plenary Talks-Moderator: Travis Shultz, U.S. DOE, NETL
- Welcome and Introduction [PDF-MB]
Heather Quedenfeld, Advanced Energy Systems Division
U.S. Department of Energy, National Energy Technology Laboratory
- NETL’s Fuel Cell Program Overview [PDF-1.71MB]
Shailesh Vora, Technology Manager, Fuel Cells
U.S. Department of Energy, National Energy Technology Laboratory
- Recent Solid Oxide Fuel Cell Cathode Studies [PDF-1.79MB]
Briggs White, Advanced Energy Systems Division
U.S. Department of Energy, National Energy Technology Laboratory
- Distributed Generation Market Potential for SOFC [PDF-1.27MB]
Katrina Krulla, Office of Program Performance and Benefits
U.S. Department of Energy, National Energy Technology Laboratory
- An Update of Proposed CO2 Regulations for Coal- and Gas-Fired Power Plants [PDF-1.15MB]
Eric Grol, Strategic Energy Analysis & Planning Division
U.S. Department of Energy, National Energy Technology Laboratory
Industry Teams-Moderator: Joseph Stoffa, U.S. DOE, NETL
PNNL and NETL Support for SECA: Joseph Stoffa, U.S. DOE, NETL
Wednesday, July 24, 2013
Cathodes-Moderator: Briggs White, U.S. DOE, NETL
- Synchrotron X-Ray Studies of Environmental Effects on the Oxygen Reduction Reaction on SOFC Cathodes of SOFC Cathodes [PDF-3.37MB]
Brian Ingram, Argonne National Laboratory
- Surface Segregation and Phase Formation in SOFC Cathode Thin Films [PDF-2.72MB]
Sommendra Basu, Boston University
- Understanding the Effect of Contaminants on Cathode Performance [PDF-1.29MB]
Meilin Liu, Georgia Institute of Technology
- Fundamental Characterization and Modeling of Infiltrated SOFC Cathode [PDF-1.62MB]
Xingbo Liu, West Virginia University
- Enhancement of SOFC Cathode Electrochemical Performance Using Multi-Phase Interfaces [PDF-5.31MB]
Dane Morgan, University of Wisconsin
- Surface Properties of Substituted Lanthanum Ferrites Under SOFC Conditions [PDF-3.82MB]
Michael Machala, Stanford University
- Study of the Durability of Doped Lanthanum Manganite Cathode Materials Under Real World Air Exposure Atmospheres [PDF-3.10MB]
Prabhakar Singh, University of Connecticut
- Mechanistic Enhancement of SOFC Cathode Durability [PDF-14MB]
Eric Wachsman, University of Maryland Energy Research Center
- Solid-Oxide Fuel Cell Cathode Enhancement Through a Vacuum-Assisted Infiltration Technique [PDF-2.84MB]
Greg Tao, Materials and Systems Research, Inc.
Core Technology Projects-Moderator: Patc harin Burke, U.S. DOE, NETL
Poster Presentations
- Techno-Economic Analysis of scalable Coal-Based Fuel Cells
Steven S.C. Chuang, The University of Akron
- Small Angle X-Ray Scattering Studies of Solid Oxide Fuel Cell Cathodes
Brian Ingram, Argonne National Laboratory
- Microstructural Evolution in LSM-YSZ Cathodes Over Two Years of SODC Operation
Hsiang-Jen Wang, Case Western Reserve University
- Water Gas Shift Reactions on SOFC Cells
Joseph Bonadies, Delphi
- Electrodeposited Mn-Co Alloy Coating for SOFC Interconnects
Heather McCrabb, Faraday Technology, Inc.
- Probing LSCF Cathodes Exposed to Contaminants (H2O, CO2 & Cr) Using Surface Enhanced Raman Spectroscopy (SERS) and Synchrotron-Based X-Ray Analyses.
Dong Ding, Georgia Institute of Technology
- Thin Films an Heterostructed Surfaces for Solid Oxide Fuel Cells
Dane Morgan, University of Wisconsin, Madison
- High-Temperature Viscous Sealing Glasses for Solid Oxide Fuel Cells
Cheol-Woon Kim, Mo-SCI Corporation
- Phase-Field Modeling of Three=Phase SOFC Cathode Microstructures
Linyun Liang, The Pennsylvania State University
- The Influence of Cation Segregation on SOFC Cathode Aging Behavior
Harry Abernathy, URS
- Crystallographic Structure and Stability of Pt-Substituted LSCo Electrocatalyst for SOFC Cathode
Shiwoo Lee, U.S. Department of Energy, National Energy Technology Laboratory
- Bi-Pathway ORR Kinectics on SOFC Cathode
Hui Zhang, West Virginia University
- Micro-Scale Model for Oxygen Reduction on LSM-YSZ Cathode
Suryanarayana Pakalapati, West Virginia University
- Low Cost Aluminide Based Coatings for the High Temperature Protection of Metallic Components in SOFC Systems
Neil Kinder, NexTech Materials, LTD
- Performance of Planar SOFC Stacks at Elevated Pressure
Louis G. Carreiro, Naval Undersea Warfare Center
- Stability of Nickel in Ni/Zirconia Electrodes at High Stream Concentrations
Jeff Stevenson, Pacific Northwest National Laboratory
- LSM-20/YSZ Cathode Response to Elevated Steam Content in 500-1000 h Tests
John Hardy, Pacific Northwest National Laboratory
- In-Operando XRD of Anode-Supported LSCF Cathodes at 700-8000 C for 1000 h
John Hardy, Pacific Northwest National Laboratory
- Compliant Glass Seal Development at Pacific Northwest National Laboratory: Effect of Fillers on Thermal Cycling, Isothermal Ageing, and Validation in a Stack Fixture Test
Yeong-Shyung Chou, Pacific Northwest National Laboratory
- Interconnect Lifetime Predication for Interfacial Indentation
Brian J. Koeppel, Pacific Northwest National Laboratory
- Novel Interconnect Spinel Coating Process for Planar SOFC Stacks
Jung-Pyung Choi, Pacific Northwest National Laboratory
- ROM Tool for SOFC Modeling
Brian J. Koeppel, Pacific Northwest National Laboratory
- Recent Progress of SOFC Materials Validation in a Generic Stack Fixture at Pacific Northwest National Laboratory
Yeong-Shyung Chou, Pacific Northwest National Laboratory
- Understanding the Performance of LSCF Based Solid Oxide Fuel Cell Cathodes with Non-Linear Electrochemical Impedance Spectroscopy
Dane Morgan, University of Wisconsin, Madison
- Ab Initio Based Modeling of Solid Oxide Fuel Cell Cathodes at the Molecular Scale
Dane Morgan, University of Wisconsin, Madison
NETL Conference Services Information
National Energy Technology Laboratory
Phone: (412) 386-6044 FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov
Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof. NOTE: The papers listed above are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 7.0 or newer from Adobe Systems, Inc. to view the Proceedings.
