Researchers at the U.S. Department of Energy’s National Energy Technology Laboratory (NETL) have developed a novel split laser system for in situ environmental monitoring via Laser Induced Breakdown Spectroscopy (LIBS) or Raman analysis.  The design features fiber-coupled, optically-pumped, passively Q-switched lasers that are small, portable, low cost and robust enough for even downhole applications.  The technology can be used in a wide array of applications, including, but not limited to, carbon dioxide (CO₂) monitoring for CO₂ sequestration, oil and gas monitoring, and water analysis (groundwater and municipal systems).  The technology is available for licensing and/or further collaborative research with NETL.

Proof of concept experimentation has been completed. NETL researchers are continuing to design miniaturized lasers and optical delivery systems to allow further size and cost reductions. The researchers have identified the need to complete and demonstrate both single point and multipoint measurement prototypes.  The results would further validate the technology and expedite its deployment to the private sector. 

Research is active on the technology titled,“Sulfur Tolerant Ionic Liquid Solvent for Pre-combustion Carbon Capture.” This invention is available for licensing and/or further collaborative research from U.S. Department of Energy’s National Energy Technology Laboratory.

Research is active on the development and incorporation of oxide dispersion strengthening (ODS) coatings for use in gas turbine component cooling applications. This invention is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

This invention describes a uniquely engineered 2-D amorphous carbon film and a memristor fabricated with coal-derived carbon quantum dots as the dielectric (switching) media for resistive random-access memory (RRAM). The atomic dielectric carbon layer can provide large storage density and 3-D packing ability, allowing memory and logic devices to be integrated in one chip, providing faster data processing with low energy consumption. This patent application is jointly owned by NETL and the University of Illinois-Urbana Champaign (UIUC) and it is available for licensing and/or further collaboration.

Challenge
Memory is essential to future computing with the exponential growth of data. These emerging memory technologies aim to revolutionize the existing memory hierarchy. Various emerging memory technologies are actively being investigated to meet ideal performance characteristics. RRAM has various advantages such as easy fabrication, simple metal-insulator-metal structure, excellent scalability, nanosecond speed, and long data retention. RRAM has been commercialized since 2013. Despite showing great promise over conventional RAM and its popularity in academia, RRAM has not become commercially popular. This is due to high device variability and high operation voltage.

This invention describes novel iron-based catalysts for conversion of carbon dioxide (CO₂) to produce valuable gases such as carbon monoxide (CO) or syngas in the presence of fuel (biomass, coal, methane) for commercial and industrial applications while reducing greenhouse gas emissions. This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Challenge
Syngas production from solid fuels such as biomass or coal is commercially conducted via a solid fuel gasification process. However, conventional solid fuel gasification processes are generally capital-intensive and require significant amounts of parasitic energy. Typically, the gasification process involves partial coal combustion with either O₂ or air. When air is utilized, nitrogen (N₂) may enter the syngas, diluting the syngas and making extraction difficult. When oxygen (O₂) is utilized, expensive oxygen production units tend to generate high parasitic losses. As a result, the development of alternative methods for syngas production from solid fuels are a significant area of current interest. For oxygen-based commercial solid fuel gasification, oxygen must be separated from air, which requires an air separation unit. Cryogenic air separation has been used and is very expensive. In addition, steam is also required for the process. Gasification of solid fuel with CO₂ has many advantages over conventional solid fuel gasification with oxygen/steam. 
Syngas production from methane is currently conducted via catalytic steam methane reforming and the process is energy intense with high carbon footprint. Catalytic methane dry reforming using CO₂ to produce syngas has a potential to be more economical route for syngas production.  However, the catalysts used for methane dry reforming are either very expensive or has shown poor performance stability due to catalyst deactivation. Therefore, catalyst development is important for methane dry reforming technology to be commercially viable.
 

Research is active on the patented technology, titled "Production of Methane-Rich Syngas from Fuels Using Multi-functional Catalyst/Capture Agent." This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

Research is active on the development of a chromia refractory brick composed principally of Cr₂O₃, Al₂O₃, and carbon deposits for operation in the slagging environment of a gasifier operating at temperatures between 1250°C and 1575°C, pressures between 300 and 1000 psi, and oxygen partial pressures between 10-4 and 10-10. This invention is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory (NETL). 

Research is active on the patent pending technology titled, “MSE-Based Drilling Optimization Using Neural Network Simulation.” This technology is available for licensing and/or further collaborative research from the U.S. Department of Energy’s National Energy Technology Laboratory.

The U.S. Department of Energy’s National Energy Technology Laboratory (NETL) has developed a method for achieving tunable gas sensitivity of surface acoustic wave (SAW) devices. The innovation implements a class of materials with tunable absolute film conductivities called conducting metal oxides (CMOs), which enables SAW devices to be calibrated for gas sensitivity in diverse harsh-environment conditions.