Non-Fouling, Low Cost Electrolytic Coagulation and Disinfection for Treating Flowback and Produced Water for Reuse (179.55 KB)

Ion Advanced Solvent CO2 Capture Pilot Project (173.39 KB)

Large-Volume Stimulation of Rock for Greatly Enhanced Fluids Recovery Using Targeted Seismic-Assisted Hydraulic Fracturing (159.14 KB)

Pressure Prediction and Hazard Avoidance Through Improved Seismic Imaging (184.49 KB)

Predictive Self-Healing Seals for Gas Transmission (183.22 KB)

Hydrate Modeling & Flow Loop Experiments for Water Continuous and Dispersed Systems (130.76 KB)

Direct Injection 4.3L Propane Engine Research, Development, and Demonstration (35.46 KB)

Characterization of Biomass-Based Fuels and Fuel Blends for Low-Emissions, Advanced Compression Ignition Engines (63.99 KB)

Development and Validation of Physics-Based Sub-Models of High Pressure Supercritical Fuel Injection at Diesel Conditions (102.97 KB)

MRCSP Phase III (Dennison Disp#1 (SWIW#11) Well Characterization) - Subtask 1.6 (338.16 KB)

Technology Integration Program (137.73 KB)

Transforming Uinta Basin Earth Materials for Advanced Products (New sampling locations) (163.64 KB)

A Probabilistic Assessment of the Geomechanical Response to CO2 Injections in Large Igneous Provinces (371.99 KB)

A Probabilistic Assessment of the Geomechanical Response to CO2 Injections in Large Igneous Provinces (372.91 KB)

Amber Kinetics Flywheel Energy Storage Demonstration (223.59 KB)

A Nonconventional CO2-EOR Target in the Illinois Basin (149.37 KB)

Enhancing CMC Temperature Performance in High-Hydrogen Environments Using Field Assisted Sintering Technology (151.94 KB)

Electric Field Assisted Thermo-catalytic Decomposition with Regeneration: Comparisons with ReaxFF Atomistic Simulations (163.2 KB)

High Throughput Computational Framework of Materials Properties for Extreme Environments (252.96 KB)

Evaluation of Agglomeration Potential of Oxygen Carriers for Chemical Looping Combustion (CLC) and Chemical Looping with Oxygen (137.1 KB)

Effect of Mixture Concentration Inhomogeneity on Detonation Properties (109.84 KB)

High Throughput Computational Framework of Materials Properties for Extreme Environments (252.96 KB)

Efficient Reduction of CO2 in a Bipolar Electrochemical Cell (136.07 KB)

Miniaturized & Cost-effective Membrane-Coated Electrochemical Sensors for Corrosion & Env. Monitoring in Nat. Gas Pipeline (156.5 KB)

Developing Materials for High-Energy-Density Solid State Li-S Batteries (42.16 KB)

A Multistage Stochastic Transmission Expansion Algorithm for Wide-Area Planning under Uncertainty (138.62 KB)

Computational Design and Discovery of Ni-Based Alloys and Coatings: Thermodynamic Approaches Validated by Experiments (192.89 KB)

Field Validation of MVA Technology for Offshore CCS: Novel Ultra-High-Resolution 3D Marine Seismic Technology (P-Cable) (147.88 KB)

A Geomechanical Model for Gas Shales Based on Integration of Stress (Project Extension) (169.02 KB)

Multifunctional Li-ion Conducting Interfacial Materials for Lithium Metal Batteries (37.03 KB)

Development of an All-Aqueous Thermally Regenerative Redox Flow Battery to Support Fossil Fuel Assets (151.45 KB)

Electrochemical Corrosion Tests for Alloys in H2S/CO2 Environments (218.3 KB)

Designing Polymer/2D MOF Composite Membranes with Enhanced CO2 Transport for CO2/N2 Separation (130.76 KB)

Electrochemically Responsive Self- Formed Hybrid Li-ion Conductors for High-Performance Li Metal Anodes (33.34 KB)

Metal-free Catalyzed Synthesis of Novel Carbon by Carbon Allotrope Seeds (177.53 KB)

Development of Lighting Application Efficacy Measurement Framework (102.15 KB)

Green-House-Gas-Reduced Coal-and-Biomass-to-Liquid -Based Jet Fuel (GHGR-CBTL) Process (410.97 KB)

Development and Evaluation of a Novel Fuel Injector Design Method Using Hybrid-Additive Manufacturing (160.08 KB)

Energy Savings Assessments (ESAs) - Penn State University (102.12 KB)

Integration of Seismic-Pressure-Petrophysics Inversion of Continuous Active-Seismic Monitoring Data for Monitoring and Quantifyi (167.36 KB)

A Scaling Study of Microbially-Enhanced Coalbed Methane (MECBM): Optimizing Nutrient Delivery for Maximized Methane Production (140.1 KB)

Optimization of Microwave-driven, Plasma-assisted Conversion of CH4 to Hydrogen (170.79 KB)

Fundamental Studies on the Reaction Mechanisms of Oxygen Carriers for CLC/CLOU of Solid Fuels (137.57 KB)

Low Refractive Index OLEDs for Practical High Efficiency Outcoupling (153.46 KB)

Understanding Transient Combustion Phenomena in Low-NOx Gas Turbines (161.29 KB)

Multifunctional Li-ion Conducting Interfacial Materials for Lithium Metal Batteries (Phase II Downselect) (36.47 KB)

Mid-Atlantic Electrification Partnership (60.89 KB)

Dual Functional Cathode Additives for Anodeless Li-S Battery Technology (124.59 KB)

Micro-Jet Enhanced Ignition with A Variable Orifice Fuel Injector for High Efficiency Lean-Burn Combustion (184.85 KB)

Ultra-High-Speed, High-Temperature Motor (418.41 KB)