Oil & Natural Gas Projects
Exploration and Production Technologies
Application of Time-Lapse Seismic Monitoring for the Control and Optimization
of CO2 Enhanced Oil Recovery Operations
This project is being conducted in two phases. The objective of the first phase is to characterize the reservoir using advanced evaluation methods in order to assess the potential of a CO2 flood of the target reservoir. This reservoir characterization includes advanced petrophysical, geophysical, geological, reservoir engineering, and reservoir simulation technologies. The objective of the second project phase is to demonstrate the benefits of using advanced seismic methods for the monitoring of the CO2 flood fronts.
Schlumberger Data & Consulting Services - Pittsburgh, PA
New Horizon Energy - Traverse City, MI
The project has established a mappable correlation between low instantaneous frequency and high porosity. This relationship has been supported by the wavenumber study conducted with the depthed volume. This relationship will be tested in the near future when a new borehole will be drilled into the reef. Once its location has been determined the porosity the borehole will encounter will be predicted with this technique. Should this relationship be proved, it will allow the porosity distribution through these reefs to be mapped accurately. Reservoir simulations needed to optimize the field’s CO2 injection parameters then can incorporate seismically detected porosity volumes to predict CO2 migration in carbonates. The final report will discuss the details of the project work.
If it is confirmed that instantaneous frequency can be used to accurately predict the distribution of >5% porosity through-out these reefs, this will allow for highly accurate reservoir simulations and greater reserve recoveries, thereby resulting in the most optimized enhanced oil recovery (EOR) projects possible. Monitoring of CO2 floods will result in the ability to modify the injection parameters to recover more oil and sequester more CO2.
During the 1970s and 1980s, a number of Silurian Reef oil fields were discovered in the northern and southern flanks of the Michigan Basin. These fields have produced over 1 billion barrels of oil to date and are in the late stage of their primary productive life. EOR projects in these fields using CO2 injection guided by 4-D seismic monitoring will ensure that the maximum remaining reserves are recovered. This technology also will apply to monitoring CO2 sequestration projects in the future.
Project milestones include the following:
- Researchers chose for this project a Silurian-age reef in the Northern Reef trend of the Michigan Basin that was selected for a CO2 flood.
- Existing geological information was used to develop a rock property volume that then was used to model and optimize the seismic acquisition parameters.
- The base 3-D seismic survey was acquired over the Silurian reef.
- The research team performed basic seismic processing on the acquired 3-D data and interpreted the data volume.
- Seismic-attribute analysis was performed, and a potential relationship was noted between lower instantaneous frequency and porosity over 5%.
- Project researchers, using the initial porosity volume, conducted a preliminary reservoir simulation and production history matching.
- A number of existing wellbores in the reef were worked over in preparation for the commencement of CO2 injection operations.
- Researchers completed azimuthal processing on the 3-D seismic data and performed an azimuthal velocity analysis on this data set.
- A depth volume also was generated and interpreted.
- Small volumes of CO2 were injected in the upper section of the northern end of the reef.
- The research team conducted wavenumber analysis using depthed volume, which appears to support the instantaneous-frequency study.
- It was discovered that the reef has been inadvertently “dump flooded” through shallow casing leaks since the primary production was concluded.
- A more detailed porosity distribution throughout the reef has been generated.
- The new porosity distribution is currently being used for a new reservoir simulation that will attempt to better model the field performance.
- The simulation is in the process of major updating to include recent pressure data, CO2 injection history, addition of the A-1 Carbonate formation as a productive interval, and an improved PVT description.
Current Status (February 2009)
This project has been completed. Due to its size (57MB), the final report is available upon request. See contact information below.
(left) Composite Blended Seismic Attribute display. This display combines high
amplitude and high variance for two time slices (855 and 860 msec.) and clearly
shows the reef's edge. (right) Instantaneous Frequency Display. Shown are two
synthetic seismograms for two wells (on and off reef) used for well-to-seismic
ties overlain on an Instantaneous Frequency slice through the reef. Note the
low-frequency zone (blue) corresponding to the perforated (high-porosity) interval.
Project Start: March 1, 2004
Project End: November 30 , 2008
Anticipated DOE Contribution: $1,971,240
Performer Contribution: $7,085,519 (78% of total)
NETL - Chandra Nautiyal (Chandra.Nautiyal@NETl.doe.gov or 918-699-2021)
Schlumberger - Joseph Frantz (firstname.lastname@example.org or 412-787-5403)
Due to the size of the PDF file (57MB), the final report is available upon request.
High wavenumber distribution through the reef for in-line 1046 through two of the boreholes. Note that zones of high wavenumber (in color) correspond with initial zones perforated in the wells and is believed related to zones of high porosity.