Oil & Natural Gas Projects
Exploration and Production Technologies
Surfactant-Based Enhanced Oil Recovery Processes and Foam Mobility Control
The purpose of the research is to develop advanced, surfactant-based enhanced
oil recovery (EOR) processes based upon tailoring new high-performance and cost-effective
surfactant molecules for specific crude oils. The goal will be to develop a
methodology for recovery of both light and moderately heavy oils from sandstone
and carbonate reservoirs. A secondary focus is foam as a mobility control agent
for EOR processes using nitrogen, natural gas, and carbon dioxide to create
the foam. The objectives of the proposed research are to 1) develop new cost-effective
surfactants and processes, 2) present a mechanistic understanding of how these
processes work, and 3) develop simulation tools to scale-up the processes for
University of Texas
A surfactant-polymer formulation is being developed for a West Texas carbonate
reservoir that has a pressure too low for CO2 flooding. The formulation has
recovered up to 95% of the oil remaining after waterflooding in reservoir formation
core material. The project team has met with the operator and partners to plan
for a field test.
An alkaline-surfactant process is being developed for a fractured, oil-wet,
carbonate reservoir in West Texas. The oil-wet character of the crude oil/brine/rock
system is such that an oil-saturated core placed under formation brine does
not recover any oil by spontaneous imbibition. However, when the brine is replaced
by an alkaline surfactant solution, oil is spontaneously displaced by gravity
drainage. The alkaline surfactant solution both alters wettability and reduces
interfacial tension to ultralow values. Thus it overcomes the capillary retardation
forces and permits the oil to flow by buoyancy or gravity drainage. The original
operator of the field sold the field to another company, and the latter has
less interest in surfactant EOR.
This project is developing surfactant EOR processes for companies that do not
have an in-house research capability. The oil recovery from laboratory experiments
for the surfactant-polymer process is far greater than the best recovery achieved
by a vendor contracted by the operator. Developing efficient EOR processes and
making the knowledge available to the industry will result in increased oil
recovery from the mature oil reservoirs that are nearly depleted by conventional
waterflooding. This will aid the economy of Texas and reduce the dependency
of the United States on imported crude oil.
During the 1990s, the members of the project team partnered to develop surfactant-enhanced
aquifer remediation processes. The surfactant/foam aquifer remediation process
recovered all or more DNAPL contaminant than thought to be present every time
it was applied. In 1999, Dr. Hirasaki (principal investigator, Rice University)
partnered with Dr. Mukul Sharma (University of Texas) in the DOE project Characterization
of Mixed Wettability States and Its Impact on Oil Recovery (DE-AC26-99BC15205).
In that project, the benefit of wettability alteration and ultralow interfacial
tension for spontaneous oil displacement from fractured, oil-wet, carbonate
formations was recognized. The present team partnered to combine the collective
experience over the past 30 years in surfactant EOR.
Project researchers have:
- Developed surfactant formulations capable of efficient tertiary oil
recovery in carbonate formations at low temperatures.
- Recognized that the adsorption of anionic surfactant on carbonate minerals
can be significantly reduced in the presence of sodium carbonate.
- Identified the dependence of the optimal salinity of alkali-surfactant formulations
on the ratio of the naphthenic soap/synthetic surfactant.
- Described the mechanisms controlling the length of the ultralow interfacial
tension region during displacement of the alkali/surfactant/polymer (ASP) processes.
- Demonstrated that the sweep of heterogeneous fracture systems with surfactant
solution is much more efficient when the surfactant solution is injected as
- Scheduled a single-well field trial in a West Texas carbonate formation for January 2006. This test will be evaluated with tracers. This is a surfactant-polymer process with surfactants that are especially tolerant to divalent ions. Up to 95% of the waterflood residual oil was recovered from reservoir core floods.
- Developed a strategy for designing ASP flooding. Recovery of 98% of the water-flooded residual oil in dolomite is possible with a 0.5 pore volume surfactant slug with only 0.2% surfactant.
- A blend of two surfactants was found to form single-phase solutions over a higher salinity or calcium concentration ranges than either surfactant alone.
- Ultra-low interfacial tension (<10-2 mN/m) was found over a much wider range of salinity than expected for one ASP and crude oil combination.
The project team is developing surfactant EOR processes for both forced displacement and for spontaneous displacement by gravity from matrix blocks surrounded by fractures. Surfactants have been selected to have tolerance to divalent ions such that the systems can be applied in carbonate formations. These have branched hydrocarbon with an ethoxylated or propoxylated sulfate head group. The low temperature of shallow carbonate reservoirs often results in surfactants forming liquid crystal phases and gels rather than microemulsion. Addition of alcohol aids in formation of microemulsion. However, alcohols increase the minimum interfacial tension at optimal conditions. Highly branched internal olefin sulfonate cosurfactants are effective in reducing the alcohol requirement.
Current Status (July 2007)
This project has been completed on schedule and all project objectives have been accomplished. The results of the investigation have been incorporated into a Final Report.
Project Start: June 10, 2003
Project End: September 9, 2006
Anticipated DOE Contribution: $983,910
Performer Contribution: $271,165 (22% of total)
NETL - Daniel Ferguson (Daniel.firstname.lastname@example.org or 918-699-2047)
Rice University - George J. Hirasaki (email@example.com or 713-348-5416)
Final Report is complete and is available by calling NETL at 918-699-2000.
Hirasaki G.J., and Zhang, D.L., Surface Chemistry of Oil Recovery from Fractured,
Oil-Wet, Carbonate Formations, SPEJ, June 2004, 151-162.
There is no spontaneous imbibition oil displacement from a dolomite formation
core sample with So=0.68 when placed in formation brine (left ). When the
core sample is placed in alkaline surfactant solution, oil is spontaneously
displaced by gravity drainage, ER=44% (right).