2012 Conference Proceedings

The 26th Annual Conference on Fossil Energy Materials.

April 17-19, 2012

Table of Contents

PRESENTATIONS

  • Introduction and Opening Remarks
    Robert Romanosky, National Energy Technology Laboratory

Session 1
Session Chair: Paul Jablonski, National Energy Techchnology Laboratory

  • New High Energy Density Mg Battery Concepts for Electrical Energy Storage
    Preshant Kumta, University of Pittsburgh
  • Optical Thin Films for Gas Sensing in Advanced Coal Fired Power Plants
    Paul Ohodnicki, National Energy Technology Laboratory
  • Development of NDE Methods for Ceramic Coatings
    J.G. Sun, Argonne National Laboratory
  • Oxy-Combustion Environment Characterization: Fire- and Steam-Side Corrosion in Advanced Combustion
    Gordon Holcomb, National Energy Technology Laboratory
  • Effects of H2O and CO2 on the Selective Oxidation of Iron and Nickel Base Alloys
    Jerry Meier, University of Pittsburgh
  • Computational Modeling of Microstructural Evolution in Alloys for Advanced Fossil Power Systems
    Youhai Wen, National Energy Technology Laboratory
  • Addressing Materials Processing Issues for USC Steam Turbines
    Paul Jablonski, National Energy Technology Laboratory

Session 2: 
Session Chair: Mary Anne Alvin, National Energy Techchnology Laboratory

  • Multiscale Design of Materials
    Richard LeSar/Mark Bryden, Ames Laboratory
  • Computational Design of Creep-Resistant Alloys and Experimental Validation Ferritic Superalloys
    Peter Liaw, University of Tennessee
  • Modeling Creep-Fatigue-Environment Interactions in Steam Turbine Rotor Materials for Advanced Ultrasupercritical Coal Power Plants
    Chen Shen, General Electric Global Research
  • Electronic Structure and Mechanical Properties of 20 MAX Phase Compounds
    Wai-Yim Ching, University of Missouri, Kansas City
  • Ab-Initio and Multi-Scale Study of Al-Ni-Fe Alloy Systems
    Alex Vasenkov and Hyunwook Kwak, CFD Research Corporation; Yunkyung Shin and Adri van Duin, Pennsylvania State University
  • Computational and Experimental Development of Novel High Temperature Alloys
    Matthew Kramer, Ames Laboratory

Session 3: 
Session Chair: Peter Tortorelli, Oak Ridge national Labortatory

  • The Role of Coal Ash in the Corrosion Performance of Structural Alloys in Simulated Oxy-Fuel Environments
    Ken Natesan, Argonne National Laboratory Prediction of Fireside
  • Development of Computational Models to Predict Boiler Tube Corrosion in Advanced Combustion Systems
    Steve Kung, Babcock & Wilcox
  • Understanding Corrosion Mechanisms in Oxy-Fired Systems
    Bruce Pint, Oak Ridge National Laboratory
  • Atomization and Powder Processing of High Temperature Ferriti Stainless Steel
    Iver Anderson, Ames Laboratory
  • Bespoke Material Surfaces
    Beth Armstrong, Oak Ridge National Laboratory
  • High Temperature Corrosion Behavior of HVOF, Fe3Al Coatings
    Thomas Lillo, Idaho National Laboratory

Session 4: 
Session Chair: Pat Rawls, National Energy Technology Laboratory

  • Improving the Performance of Creep Strength-Enhanced Ferritic Steels
    Yukinori Yamamoto, Oak Ridge National Laboratory
  • Materials for Advanced Ultra-Supercritical Steam Service – Turbines
    Phil Maziasz, Oak Ridge National Laboratory
  • Materials for Advanced Ultra-Supercritical Steam Service – Boilers
    Peter Tortorelli, Oak Ridge National Laboratory
  • Joining of Advanced High-Temperature Materials
    Glen Grant, Pacific Northwest National Laboratory
  • Qualification of New Commercial ODS Alloys
    Sebastian Dryepondt, Oak Ridge National Laboratory
  • Low-Cost Fabrication of ODS Materials
    Glen Grant, Pacific Northwest National Laboratory
  • Closing Remarks
    Regis Conrad, U.S. Department of Energy

NETL Conference Services Information 
National Energy Technology Laboratory 
Phone: (412) 386-6044 FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov


Disclaimer 
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

NOTE: The papers listed above are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 7.0 or newer from Adobe Systems, Inc. to view the Proceedings.


StayConnected Facebook Twitter LinkedIn RssFeed YouTube