materials
17th Annual Conference on Fossil Energy Materials
April 22-24, 2003

Table of Contents

Disclaimer
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

Papers and Presentations

  • Welcome and Introductory Remarks
    Robert R. Romanosky, U.S. Department of Energy, NETL
    Roddie R. Judkins, Oak Ridge National Laboratory
  • SESSION I - NEW ALLOYS
    • Materials for Advanced Steam Cycles
      • Materials for Ultra-Supercritical Coal-Fired Power Plant Boilers
        R. Viswanathan, EPRI
      • Coal Ash Corrosion Resistant Materials Testing Program - 
        Evaluation of the First Section Removed in November 2001
        Dennis K. McDonald, Babcock & Wilcox Company
      • Understanding Damage Mechanisms in Ferritic Steels
        Robert W. Swindeman, Oak Ridge National Laboratory
      • Materials for Ultra-Supercritical Steam Turbines
        Philip J. Maziasz & Ian Wright, Oak Ridge National Laboratory
      • Coal-Ash Corrosion of Alloys for Combustion Power Plants
        Ken Natesan, Argonne National Laboratory
      • Desulfurization of Coal
        Timothy R. Armstrong, Oak Ridge National Laboratory
    • Materials for Advanced Heat Exchange
      • Materials Issues in Biomass-Fired Energy Systems
        John E. Oakey, Cranfield University
      • ODS Alloy Development
        Ian Wright, Oak Ridge National Laboratory
      • Optimization of ODS FeCrAl and Fe3Al Alloy Properties
        Bimal K. Kad, University of California - San Diego
      • Reduction in Defect Content in ODS Alloys
        Andy R. Jones, University of Liverpool
  • SESSION II - FUNCTIONAL MATERIALS
        • Development of Inorganic Membranes for Hydrogen Separation
          Roddie R. Judkins, Oak Ridge National Laboratory 
        • Hydrogen Separating Membranes for Coal Gas Reforming 
          Stephen Paglieri, Los Alamos National Laboratory 
        • Synthesis and Properties of Materials for Hydrogen Separation Membranes  Timothy R. Armstrong, Oak Ridge National Laboratory 
        • Corrosion Behavior of Stainless Steels in Solid Oxide Fuel Cell Simulated Gaseous Environments
          Margaret Ziomek-Moroz, U.S. Department of Energy, Albany Research Center  
      • Materials for Gas Clean-up
        • Development of Novel Activated Carbon Composites
          Tim Burchell, Oak Ridge National Laboratory 
        • Metallic Filters for Hot Gas Cleaning
          Iver Anderson, Ames Laboratory, Iowa State University  
      • Fuel Cell Materials Issues
        • Development of Brazing Technology for Use in High-Temperature Gas Separation Equipment
          Scott Weil, Pacific Northwest National Laboratory 
        • Materials Issues in Alkaline Fuel Cells
          David P. Bloomfield, Analytic Energy Systems 
  • SESSION III - BREAKTHROUGHS IN MATERIALS PERFORMANCE & RELIABILITY
    • Introductory Remarks
      Moderator - Ian Wright, Oak Ridge National Laboratory
    • Temperature Capabilities Beyond Current Alloys
      • Strategies for Strengthening Metallic and Intermetallic Alloys at High Temperatures   C.-T. Liu, Oak Ridge National Laboratory 
      • MoSiB Alloy Developments and Prospects
        Doug Berczik, Pratt & Whitney 
      • Mo-Si-B Alloy Development
        Joachim H. Schneibel, Oak Ridge National Laboratory 
      • Effects of Wet Air and Synthetic Combustion Gas Atmospheres on the Oxidation Behavior of Mo-Si-B Alloys
        Matthew J. Kramer, Ames Laboratory 
    • Refractories for Increased Reliability in Gasification Reactors
      • Trends and Continuing Needs for Refractories for Gasifier Duty
        C.E. Semler, Consultant 
      • Improved Refractories for Slagging Gasifiers in IGCC Power Systems
        Cynthia Powell Dôgan, U.S. Department of Energy, Albany Research Center 
    • Smart Materials
      • Concepts and Materials Needs for Condition-Monitoring Sensors
        Jim Hardy, Oak Ridge National Laboratory 
      • Concepts for Smart, Protective High-Temperature Coatings
        Peter Tortorelli, Oak Ridge National Laboratory 

Posters

  • Coatings and Protection of Materials
    • High-Temperature Sulfidation Resistance of Fe-A1-Cr Alloys at 500o
      Jonathan Regina, Lehigh University 
    • Coating Miscrostructure-Property Issues 
      Terry C. Totemeier, Richard N. Wright and W. David Swank,
      Idaho National Engineering and Environmental Laboratory  
    • High Temperature Oxidation Performance of Aluminide Coatings 
      Bruce A. Pint, Oak Ridge National Laboratory  
    • Interdiffusion Behavior in Aluminide Coatings for Power Generation Applications Ying Zhang, Tennessee Technological University  
    • Slurry-Based Ceramic Coatings for Corrosion Resistance
      Beth L. Armstrong, Oak Ridge National Laboratory  
    • Chemically Vapor Deposited YSZ for Thermal and Environmental Barrier Coatings Theodore M. Besmann, Oak Ridge National Laboratory  
    • Modeling of Chemical Vapor Deposited Zirconia for Thermal Barrier and Environmental Barrier Coatings
      Thomas L. Starr, University of Louisville  
    • Development of Nondestructive Evaluation Methods for Ceramic Coatings
      William A. Ellingson, Argonne National Laboratory  
    • High Temperature Materials Testing in Coal Combustion Environments
      M. Mathur and M. Freeman, U.S. Department of Energy, NETL  
    • High Temperature Material Testing Results in Coal Combustion Environments
      Beth L. Armstrong, Oak Ridge National Laboratory  
  • New Alloys
    • Improved ODS Alloy for Heat Exchanger Tubing
      G. Smith, Special Metals Corp. 
    • High Creep-Strength Alloys
      Philip J. Maziasz, Oak Ridge National Laboratory 
    • Oxidation and Sulfidation Resistant Alloys with Silicon Additions
      John S. Dunning, U.S. Department of Energy, Albany Research Center 
    • Ultrasupercritical Steam Corrosion
      Gordon R. Holcomb, U.S. Department of Energy, Albany Research Center 
    • Corrosion in a Temperature Gradient
      Gordon R. Holcomb, U.S. Department of Energy, Albany Research Center 
    • Fireside Corrosion Testing of Candidate Superheater Tube Alloys Coatings and Claddings-Phase III
      Jeff Blough, Foster Wheeler Development Corporation 
  • Functional Materials
    • Economical Fabrication of Membrane Materials
      Timothy R. Armstrong, Oak Ridge National Laboratory 
    • Hydrogen Permeability of Palladium-Copper Alloy Composite Membranes Over a Wide Range of Temperatures and Pressures
      Bret H. Howard, U.S. Department of Energy, NETL 
  • Breakthroughs in Materials Performance and Reliability
    • High Temperature Materials Testing in a Pilot-Scale Coal Combustion System  
      John P. Hurley and Patty L. Kleven, Energy and Environmental Research Center 
    • Multi-Phase Cr-Based Alloys for Aggressive High-Temperature Environments 
      Peter Tortorelli, Oak Ridge National Laboratory  
    • Eutectic Behavior of Cr-Ta and Cr-Ta-Mo Composites Reinforced by the Cr2Ta Laves Phase
      Peter K. Liaw, University of Tennessee  
    • Development of a Commercial Process for the Production of Silicon Carbide Fibrils
      Richard D. Nixdorf, ReMaxCo Technologies, Inc.  

NETL Conference Services Information

Conference Services
National Energy Technology Laboratory
Phone: (412) 386-6044
FAX: (412) 386-6486
E-mail: kimberly.yavorsky@netl.doe.gov


Disclaimer 
This report was prepared as an account of work sponsored by an agency of the United States Government. Neither the United States Government or any agency thereof, nor any of their employees, makes any warranty, express or implied, or assumes any legal liability or responsibility for the accuracy, completeness, or usefulness of any information, apparatus, product, or process disclosed, or represents that its use would not infringe privately owned rights. Reference herein to any specific commercial product, process, or service by trade name, trademark, manufacturer, or otherwise does not necessarily constitute or imply its endorsement, recommendation, or favoring by the United States Government or any agency thereof. The views and opinions of authors expressed herein do not necessarily state or reflect those of the United States Government or any agency thereof.

NOTE: The papers listed above are in Portable Document Format (PDF). It is recommended to use the Adobe Acrobat Reader 7.0 or newer from Adobe Systems, Inc. to view the Proceedings.

StayConnected Facebook Twitter LinkedIn RssFeed YouTube